How to write a HACCP plan (US, step by step)
The short answer
Assemble a team, describe the food and how it is made, draw and verify the process flow, analyze the hazards at each step, pick the critical control points, set a limit for each, then set monitoring, corrective actions, verification and records. Which rule you follow depends on what you make: USDA for meat and poultry, FDA for seafood and juice, and a FSMA food safety plan for most other manufacturers.
Build my free HACCP planFirst, which rule applies to you?
In the US there is no single HACCP law for all food. The plan you write depends on the product. The method is the same in every case, the seven HACCP principles. What changes is who requires it and how formal it must be.
| You make or sell | What you follow |
|---|---|
| Meat or poultry (USDA inspected) | A HACCP plan under 9 CFR Part 417, overseen by USDA FSIS |
| Seafood or fish products | A HACCP plan under 21 CFR Part 123 (FDA) |
| Juice or juice products | A HACCP plan under 21 CFR Part 120 (FDA) |
| Other packaged or manufactured food | A written food safety plan under 21 CFR Part 117 (FSMA preventive controls), prepared or overseen by a Preventive Controls Qualified Individual (PCQI). Small businesses may qualify for modified requirements. |
| Restaurant, cafe, food truck, retail food store | The FDA Food Code as adopted by your state or local health department. A formal HACCP plan is usually only required for certain specialized processes or when a variance is needed. |
The five preparation steps
- Assemble the HACCP team. Production, quality, maintenance and sanitation. Add outside expertise if you do not have it in house.
- Describe the food and how it is distributed. Ingredients, processing, packaging, shelf life, storage and distribution conditions.
- Identify the intended use and consumers. Will it be cooked before eating? Are infants, older adults or immunocompromised people likely to eat it?
- Develop a flow diagram. Every step from receiving to shipping or service.
- Verify the flow diagram on site. Walk the floor and correct the chart to match what really happens.
The seven principles
- 1
Conduct a hazard analysis
For each step, list biological, chemical and physical hazards, plus allergens. In a FSMA food safety plan the hazard analysis also has to consider radiological hazards and hazards that may occur through economically motivated adulteration. Decide which are significant, meaning reasonably likely to cause illness or injury without a control.
- 2
Determine the critical control points
A critical control point (CCP) is a step where control can be applied and is essential to prevent, eliminate or reduce a hazard to an acceptable level. A decision tree helps. Under FSMA, some controls are other preventive controls (process, allergen, sanitation, supply-chain) rather than CCPs, so not every control needs to be a CCP.
- 3
Establish critical limits
Each CCP needs a measurable limit. These Food Code figures are commonly used.
The limits to remember
- Cold holding at 41°F (5°C) or below.
- Hot holding at 135°F (57°C) or above.
- Cook poultry to 165°F (74°C) for 15 seconds.
- Cool cooked food from 135°F to 70°F within 2 hours, then to 41°F within a further 4 hours.
Source: FDA Food Code. States adopt different editions, so confirm with your local regulator.
The Food Code is adopted by states and localities on different editions and with local changes, so confirm the figures with your regulator. For USDA and FDA seafood, juice and manufacturing limits, use the specific regulation and guidance for your product, for example the FSIS cooking and cooling guidance for meat and poultry.
- 4
Establish monitoring procedures
Say who checks each CCP, how (a calibrated thermometer, a timer, a pH meter) and how often, and make sure the result is recorded at the time.
- 5
Establish corrective actions
Decide in advance what happens when a limit is missed: fix the cause, stop the line, and decide what to do with the affected product. FSMA and FSIS both expect a record of the correction.
- 6
Establish verification procedures
Validate that the plan works, calibrate instruments, review records, and reanalyze the plan whenever something changes and at least every three years under the FSMA preventive controls rule.
- 7
Establish record-keeping and documentation
Keep the plan, hazard analysis, monitoring, corrective action, verification and training records. Retention is typically at least two years for FSMA preventive controls records, and varies for other programs, so check the rule that applies to you.
This guide is general information, not legal advice. Specialized products (canned and acidified foods, seafood, juice, Grade A dairy, and meat and poultry) have their own detailed rules, so work with your regulator or a qualified food safety professional.
Build your plan in about 10 minutes
Describe your business in your own words. The free generator drafts the hazards, critical control points, limits with their source, monitoring and records for you to edit and download.
Build my free HACCP planQuestions
What is the difference between a HACCP plan and an FSMA food safety plan?
A HACCP plan follows the seven HACCP principles and is mandatory for meat and poultry, seafood and juice. A FSMA food safety plan is required for most other registered food facilities. It includes a hazard analysis and preventive controls, which can include CCPs but also process, allergen, sanitation and supply-chain controls, and it must be prepared or overseen by a PCQI.
Does a restaurant need a HACCP plan in the US?
Usually not as a standalone document. Restaurants follow the FDA Food Code as adopted by their state or local regulator. A HACCP plan may be required for specialized processes such as curing, smoking for preservation, reduced oxygen packaging or when a variance is needed.
What is a PCQI?
A Preventive Controls Qualified Individual is someone who has completed standardized training in FSMA preventive controls or is otherwise qualified through experience. A PCQI prepares or oversees the food safety plan for a facility subject to 21 CFR Part 117.
How long do I keep HACCP records in the US?
It depends on the rule. FSMA preventive controls records are generally kept for at least two years. Meat, poultry, seafood and juice programs have their own retention rules, so check the regulation for your product.
Where do I find the Food Code temperatures for my state?
Your state or local health department publishes the edition and any changes it has adopted. The FDA publishes the model Food Code on its website.