HACCP, explained and built free
Your HACCP plan, explained and built in minutes
A HACCP plan is a written food safety plan that finds the hazards in your food, picks the steps that control them, and sets limits, checks and records for each one. Start with the guide for your country, or build a draft plan now.
What is HACCP?
A food safety plan built around your own food
HACCP stands for Hazard Analysis and Critical Control Points. It is a way of keeping food safe by thinking ahead. You work out what could go wrong at each step of your process, decide where you can stop it, and keep proof that you did. Instead of hoping the finished product turns out fine, you control the hazards while the food is being made.
The method comes from the Codex Alimentarius, and both UK and US food safety rules are built on it.
- It is how the law thinks about food safety. In the UK, Regulation 852/2004 requires every food business to have procedures based on HACCP principles. In the US, HACCP is mandatory for meat and poultry, seafood and juice, and FSMA builds on the same ideas for most other manufacturers.
- It scales from a cafe to a factory. A small caterer can often meet the duty with a simple pack, while a manufacturer needs a documented plan with validated limits.
- It is what auditors and buyers ask for. Retailers and schemes such as BRCGS and SQF are built on HACCP, so a clear plan shortens audits and helps win contracts.
- It protects you when something goes wrong. A plan with records is your evidence that you took reasonable care.
Where should you start?
Tell us what you do and we will point you at the right guide.
What best describes you?
Tap one.
Many UK small caterers meet the duty with the FSA’s Safer Food, Better Business pack. Start with what the law actually asks of you.
See a worked example with the flow, hazards, critical control points and limits for a bakery, then adapt it to your own products.
Follow the five preparation steps and seven principles, then draft the plan and take it through your own validation.
Most US restaurants and food trucks follow the FDA Food Code as adopted by their state or local regulator. A plan can be required for specialized processes. Check where you stand.
Which rule applies depends on what you make. Work out which, then follow the steps.
It takes about 10 minutes, it is free, and every line is editable. You can read the guides afterwards.
The seven principles, one at a time
Every HACCP plan in the UK and the US is built on the same seven ideas. Tap through them.
1
Hazard analysisAt every step of your process, list what could make someone ill or hurt them: bacteria and viruses, chemicals, physical objects like glass or metal, and allergens. Note how likely each one is, how serious it would be, and what you already do about it.
ExampleRaw chicken carries Salmonella and Campylobacter, so the hazard is present from delivery through to cooking.
2
Critical control pointsA critical control point, or CCP, is a step where you can prevent, remove or reduce a hazard to a safe level and where nothing later in the process will do the job. Most businesses end up with only a handful.
ExampleCooking chicken to a safe core temperature. Cleaning a worktop usually is not a CCP, because your cleaning programme controls it.
3
Critical limitsA critical limit is the measurable line between safe and unsafe at a CCP. It has to be something you can check on the spot, and it should come from a source you can point to.
Example70°C for 2 minutes at the core in the UK. 165°F (74°C) for 15 seconds for poultry in the US.
4
MonitoringDecide who checks each CCP, with what (a calibrated probe, a timer, a pH meter) and how often, and write it down so a new starter can do it without asking.
ExampleProbe the core temperature of every batch and record the reading at the time.
5
Corrective actionsDecide in advance what happens when a limit is missed, who decides, and what happens to the affected food. Deciding during the problem is how mistakes get made.
ExampleKeep cooking until the limit is reached, or discard the food if it has been held in the danger zone too long.
6
VerificationCheck that the whole system works. Calibrate your probes, review the records, and re-read the plan whenever a recipe, supplier, piece of equipment or process changes. A plan that was right two years ago may not be right today.
ExampleA new supplier changes the ingredient, so you re-check the hazard analysis before the first delivery.
7
RecordsKeep the plan, the monitoring records, corrective actions, calibration, training and reviews. An inspector or auditor will ask to see them, and the records are your proof that the plan is real.
ExampleA cooking log with the date, product, temperature, time, who checked it and what was done when it failed.
Before the principles
Understand your process before you analyse it
Most weak HACCP plans go wrong before the hazard table even starts. The plan has to describe the food you really make, in the way you really make it, so the first job is to get your process down on paper and check it against reality.
- Pick the team. A plan should not be one person’s homework. Include whoever knows how the food is made, whoever buys, and whoever cleans.
- Describe each product. Ingredients, allergens, how it is made and packed, shelf life, how it is stored, and who eats it, including any vulnerable groups.
- Draw the flow. One box per step, from delivery to dispatch or service, so no step is missed.
- Walk it on site. Check the chart against a real shift. The gap between the drawing and the floor is where hazards hide.
A simple process flow. Dark steps are usually critical control points.
The four kinds of hazard
Every hazard analysis sorts what could go wrong into the same four groups.
Biological
Bacteria such as Salmonella, Listeria and E. coli, plus viruses and parasites. They are the main cause of food poisoning and are usually controlled by temperature, time and hygiene.
Chemical
Cleaning products, pesticide residues, mycotoxins and additives used wrongly. Controlled through supplier specifications, storage and correct use of chemicals.
Physical
Glass, metal, plastic, wood, stones and bone. Controlled by equipment and packaging checks, sieves, magnets and metal detection, and good housekeeping.
Allergens
The UK has 14 allergens to declare and the US has 9 major allergens. Controlled by segregation, cleaning between products and accurate labelling.
UK limits
The temperatures every UK food business should know
A critical limit is the measurable line between safe and unsafe. In the UK, a handful of figures come up in almost every food business, and each has an official source you can check.
- Cooking: 70°C for 2 minutes at the core. Equivalents such as 75°C for 30 seconds or 80°C for 6 seconds also work. Source: GOV.UK, cooking food safely.
- Hot holding: 63°C or above. Food can be below 63°C for up to 2 hours once, then it must be cooled or thrown away.
- Chilled storage: 8°C or below. That is the legal maximum in England, Wales and Northern Ireland. The FSA target is 5°C, and in Scotland the working limit is 5°C.
- Your own limits need proof. Where no standard figure exists, for a step such as cooling, you set the limit yourself and validate it with testing.
US limits
The Food Code temperatures behind US food service
In the US, the FDA Food Code sets the model rules for restaurants, grocery stores and other retail food businesses. Each state adopts its own edition, so confirm the figures with your regulator.
- Cold holding: 41°F (5°C) or below.
- Hot holding: 135°F (57°C) or above. Keep hot food out of the temperature danger zone between 41°F and 135°F.
- Poultry: 165°F (74°C) for 15 seconds. The cooking limit for poultry and stuffed foods in the Food Code.
- Cooling: 135°F to 70°F within 2 hours, then to 41°F within a further 4 hours. Slow cooling is a well-known cause of foodborne illness.
For meat, poultry, seafood and juice, use the USDA FSIS or FDA rule for your product.
US step-by-step guideUK and US HACCP rules side by side
The seven principles are the same. What the law requires, and who enforces it, is not.
| United Kingdom | United States | |
|---|---|---|
| Main rules | Regulation (EC) 852/2004, Article 5, retained in UK law | FDA Food Code, FSMA (21 CFR 117), USDA FSIS (9 CFR 417), FDA seafood and juice rules (21 CFR 123 and 120) |
| Is a plan required? | HACCP-based procedures for every food business, in proportion to its size | Mandatory for meat, poultry, seafood and juice. A FSMA food safety plan for most manufacturers. Most restaurants follow the Food Code. |
| Who enforces it | Local authority environmental health officers, with the FSA and Food Standards Scotland | FDA, USDA FSIS, and state and local health departments |
| Chilled limit | 8°C legal maximum in England, Wales and Northern Ireland. 5°C target and Scotland limit. | 41°F (5°C) or below |
| Allergens | 14 allergens to declare | 9 major allergens |
| Units | Degrees Celsius | Degrees Fahrenheit, with Celsius in brackets |
Six mistakes that fail plans
What inspectors and auditors tend to find, and the fix for each.
Calling everything a CCP
Thirty CCPs means nobody can monitor them properly.
Keep CCPs for steps where nothing later can fix the hazard.
Copying a generic template
A plan that does not match your kitchen or line is obvious within minutes.
Draw your own flow and walk it on a real shift.
Never validating the limits
A cooling time or bake time nobody has tested is a guess.
Prove limits with test runs and probe records.
Filling in records at the end
A reading nobody could have taken loses an auditor’s trust fast.
Record the check at the time you do it.
Treating the plan as finished
Menus, suppliers and equipment change. The plan has to change with them.
Review it whenever anything changes, and at least once a year.
Forgetting allergens
Allergen cross-contact and wrong labels are among the most common failures.
Treat allergens as a hazard at every step and check labels against the recipe.
The free generator
From a blank page to a draft plan in about 10 minutes
Writing a HACCP plan from nothing takes days. The mpro5 generator does the first draft for you, so your team spends its time checking and improving the plan instead of typing it.
- Describe it in your own words. Or answer a few questions. The generator fills in the details from your description, and you can change any of it.
- Every limit shows where it comes from. Each figure is tagged as an official source, industry guidance, a starting value to validate, or set by your own validation.
- UK or US rules. Temperatures in the right units, with the right regulator named and the right allergen list.
- Edit everything, then take it away. Add your own steps, reorder them, and download a PDF or Word file to validate with your team.
An example. Your plan will differ.
1. Describe your business
We make fresh sandwiches and salads for a few local shops, and we cook chicken in house.
2. Review what it drafted
What the generator covers
Eleven kinds of food manufacturer and four kinds of food service business, with UK or US rules.
Specialist products such as infant formula, raw milk products, live shellfish and egg products are outside the generator and need a specialist.
After the plan
The plan is day one. The daily checks are the job.
A HACCP plan only protects you if someone runs it every day: the temperature checks, the corrective actions, the records an auditor will accept. On paper that is a lot of clipboards, and a lot of boxes ticked at the end of the shift.
mpro5 runs those checks on your team’s phones, flags a failure the moment it happens, and keeps the proof. It works from the plan you already have.
All the HACCP guides
Plain, sourced and kept up to date.
United Kingdom
How to write a HACCP plan (UK)The five preparation steps and seven principles, with the law behind them Is a HACCP plan a legal requirement in the UK?What the law asks of a cafe, a takeaway and a manufacturer HACCP plan for a bakery (UK example)A worked plan with the flow, hazards, CCPs and limitsEvery plan you build here is a draft. The law expects a food business to build and validate its own plan, so someone competent in your business needs to check it, test the limits against your own process, and sign it off.
Questions
What is a HACCP plan?
A HACCP plan is a written document that identifies the food safety hazards in your business, the steps where you control them, the limits that must be met at each step, how you check them, what you do if a check fails, and the records you keep. It is based on the seven Codex HACCP principles.
What are the seven HACCP principles?
Conduct a hazard analysis, determine the critical control points, establish critical limits, establish monitoring procedures, establish corrective actions, establish verification procedures, and establish record-keeping and documentation.
Is the HACCP plan generator really free?
Yes. You can build the plan, edit it and download it as a PDF or Word file without a trial or a card. We ask for your email before the download so we can send it and answer questions.
Does it work for both the UK and the US?
Yes. The generator uses UK rules (Regulation 852/2004, FSA guidance, Scotland and Northern Ireland differences) or US rules (FDA Food Code, 21 CFR 117 for manufacturers, USDA FSIS for meat and poultry), and shows temperatures in the units for your country.
Do I legally need a HACCP plan?
In the UK, every food business must have procedures based on HACCP principles, though a small caterer can often meet this with Safer Food, Better Business. In the US, a HACCP plan is mandatory for meat and poultry, seafood and juice, most other manufacturers need a FSMA food safety plan, and most restaurants follow the Food Code.
How long does it take to write a HACCP plan?
A small food business can draft a plan in a day or two once the basics are in place, and validating it and training staff takes longer. The generator produces a first draft in about 10 minutes, which a competent person then checks against how your business really works.
What is the difference between a HACCP plan and a food safety plan?
They overlap. A HACCP plan follows the seven principles. In the US, a FSMA food safety plan is the plan most manufacturers must have, and it includes a hazard analysis and preventive controls, which can include critical control points as well as allergen, sanitation and supply-chain controls.
Can I rely on the plan without checking it?
No. Treat it as a first draft. You need to confirm the limits suit your own process, train your staff, and review the plan whenever you change a product or process. If your products are specialist (for example canned, juice or seafood in the US), speak to your local authority or a food safety professional.
How often should I review my HACCP plan?
Whenever something changes, such as a recipe, supplier, piece of equipment or process, and at least once a year even if nothing has. Record the review.
Ready to build yours?
Describe your business in your own words. The free generator drafts the hazards, critical control points, limits with their source, monitoring and records for you to edit and download.
Build my free HACCP plan