← Back to blog

HACCP plan for a bakery (UK example)

Fred Whipp
November 18, 2026
5 min read

The short answer

A bakery HACCP plan covers goods in, dry and chilled storage, mixing, baking, cooling, any fillings, packing, labelling and dispatch. Baking is usually controlled by a validated time and temperature, allergens and fillings need their own controls, and flour is treated as a raw ingredient unless the product is fully baked.

Build my free HACCP plan
70°CCooked meat, egg and cheese fillings, 2 minutes at the core
8°CChilled maximum for fillings and cream (5°C target)
14Allergens to declare, many in the same room
YoursThe bake time and temperature, set and proved by you

Updated 18 November 2026

The process flow

Seven steps from the delivery door to the van. The dark boxes are the steps that are usually critical control points. Outlined boxes need an operational control. Your own bakery will differ, so redraw it for your site.

1. Goods inFlour, sugar, fats, eggs, dairy, fillings, seeds, packaging
2. StorageDry store, plus fridge for dairy, eggs and fillings
3. MixingWeigh, mix, prove, deposit and shape
4. BakingSet time and oven temperature
5. CoolingCool, depan, slice, glaze
6. FillingsCooked fillings, cream, custard, jam
7. Pack and dispatchLabel, check allergens, dispatch

Dark = usually a CCP. Outlined = operational control, such as allergen management and label checks.

Hazards and controls

Goods inMycotoxins in flour, nuts, seeds and dried fruit

Supplier specifications that meet the legal maximum levels (Regulation 1881/2006), with a certificate of analysis for high-risk ingredients.

Prerequisite or operational control

Goods inPathogens in raw flour where the product is not fully baked

Use heat-treated flour for anything not baked through, with the supplier’s certificate. Salmonella and E. coli are the main concerns.

Operational control

MixingAllergen cross-contact or wrong ingredient

Gluten, egg, milk, nuts, sesame, soya and sulphites. Allergen matrix, segregation, cleaning between products, controlled seed and nut handling.

Operational control

BakingSurvival of pathogens in the product

A validated bake time and temperature for each product, measured at the core where relevant. The limit is yours to set and prove.

CCP for many products, your own limit

Cooling and handlingContamination by hands, surfaces and air

Hygiene, cleaning, and separation of raw and baked areas.

Prerequisite

Cooked savoury fillingsSurvival of pathogens in meat, egg or cheese, and growth if cooled slowly

Core 70°C for 2 minutes (or 75°C for 30 seconds, 80°C for 6 seconds), then into the chiller within 90 minutes and at 8°C or below, with your own validated cooling time.

CCP

Cream, custard and egg fillingsGrowth of bacteria in a high-protein, high-moisture food

Chilled at 8°C or below (5°C is the FSA target), with a shelf life and time out of the fridge that you validate.

CCP or operational control

Jams, fruit and shelf-stable fillingsMould and yeast growth if the recipe drifts

A water activity and pH specification for the shelf life, checked per batch. As boundaries, a water activity above 0.85 and a pH above 4.6 allow pathogen growth in shelf-stable food, so your specification should sit below them.

CCP

Packing and labellingWrong or missing allergen information

Label check against the recipe before dispatch, and after any recipe change.

Operational control

ThroughoutMetal, glass, plastic and other foreign bodies

Sieves, magnets or metal detection where used, a glass and brittle plastic register, and equipment checks.

Prerequisite or operational control

The baking limit and the cooling time are yours to set. No single figure fits every product, so you prove yours with test bakes and probe records. That is called validation, and it is what an inspector or auditor will look for.

Allergens in a bakery

A bakery works with many of the 14 allergens that must be declared in the UK, often in the same room. Typical risks are flour dust and seed toppings moving through the air, shared tins and trays, and recipe changes that do not reach the label. Keep an allergen matrix per product, check it whenever a recipe or supplier changes, and make allergen labelling a stated step before dispatch. If you sell loose or pre-packed-for-direct-sale products, the rules for how you give allergen information are different, so check them for your sales route.

Records to keep

  1. Goods in. Checks and certificates for flour treatment and high-risk ingredients.
  2. Baking. Product, time, temperature, and core temperature where relevant.
  3. Fillings. Cook and cooling records, and fridge and chiller temperatures.
  4. Allergens and cleaning. Allergen matrix, label checks and cleaning records.
  5. Verification. Probe calibration, training and plan reviews.

Build your plan in about 10 minutes

Describe your business in your own words. The free generator drafts the hazards, critical control points, limits with their source, monitoring and records for you to edit and download.

Build my free HACCP plan

Questions

Is baking a critical control point?

For many bakery products, yes, when baking is the step that makes the product safe to eat, and it is controlled by a validated time and temperature. If the product is later eaten raw or lightly baked, or if a later step contaminates it, other controls matter more.

Do bakeries need a HACCP plan in the UK?

Yes, a bakery that sells food as a business must have food safety procedures based on HACCP principles under Regulation 852/2004. A small shop may meet this with an FSA Safer Food, Better Business pack. A producer that bakes for supply to others will usually need a documented plan.

What temperature should a bakery cook fillings to?

A common limit for cooked meat, egg and cheese fillings is 70°C for 2 minutes at the core, or an equivalent such as 75°C for 30 seconds or 80°C for 6 seconds, followed by prompt cooling and chilled storage at 8°C or below. Confirm and validate the limit for your own process.

Is flour a food safety risk?

Yes. Flour is a raw agricultural product and can carry bacteria such as Salmonella and E. coli, and mycotoxins. A full bake controls the bacteria, but flour used in raw or lightly baked products should be heat-treated, and high-risk ingredients should meet the legal contaminant limits.

Can I copy this example for my bakery?

Use it as a guide, not a copy. Your plan has to reflect your own products, equipment, layout and staff, and your own validated limits.

Book a demo